Welcome, Guest. Please login or register.
Did you miss your activation email?
December 23, 2024, 08:39:42 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Increasing (clean) headroom		 « previous next »
Pages: [1] Go Down Print
Author Topic: Increasing (clean) headroom  (Read 9569 times)
JD0x0
Sr. Member
****
Offline Offline

Gender: Male
Posts: 298


Happy Hour Hero


View Profile
« on: September 10, 2009, 01:13:53 AM »
any ideas such as tube changes to get more clean headroom from the OTS, mine starts getting dirty before "3" on the master volume.

my settings are.  volume 5, treble 4, bass 5, mids 6. mid on, rock, bright off. master needs to stay low too. i use single coil guitars.

will a *****lator help to increase headroom? since it can send less signal to the poweramp therefor staying cleaner.
Logged
It's true i've lost my marbles and i can't remember where i put them.
brickcues
Newbie
*
Offline Offline

Posts: 18


View Profile
« Reply #1 on: September 10, 2009, 04:52:55 AM »
You could try Kt66s.  I have a Vintone Crystal 38 and tried all kinds of tubes in it, EL34, 6L6 and several others.  All broke up to quick.  Went to English made GEC Kt 66 and man what a difference, but they are expensive.  I thought about putting them in my OTS but it is 100 watt and I don't need any more clean headroom and to find 4 matched KT66s would be real expensive.  Might need to check with Nik and see if amp can handle as they draw 1.5 amps where as the 6L6s draw .900 amps.

If you can find some 7581A Sylvania tubes these are rated at 35 watts each.  This should also give more clean headroom.
« Last Edit: September 10, 2009, 05:48:25 AM by brickcues » Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #2 on: September 10, 2009, 05:24:25 AM »
Quote from: JD0x0 on September 10, 2009, 01:13:53 AM
any ideas such as tube changes to get more clean headroom from the OTS, mine starts getting dirty before "3" on the master volume.

my settings are.  volume 5, treble 4, bass 5, mids 6. mid on, rock, bright off. master needs to stay low too. i use single coil guitars.

will a *****lator help to increase headroom? since it can send less signal to the poweramp therefor staying cleaner.

My OTS (with single coils, volume on 6½, rock on etc) mine doesnt get dirty until 7!! on master vol.
Check the biasing of the output tubes. Yours must be skyhigh like 50mv or so  Shocked. Get it down to 30mV and your amp will be clrean  Smiley
Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
mcinku
Administrator
Hero Member
*****
Offline Offline

Gender: Male
Posts: 1084



View Profile WWW
« Reply #3 on: September 10, 2009, 06:13:43 AM »
Quote from: bluesfendermanblues on September 10, 2009, 05:24:25 AM
My OTS (with single coils, volume on 6½, rock on etc) mine doesnt get dirty until 7!! on master vol.
Check the biasing of the output tubes. Yours must be skyhigh like 50mv or so  Shocked. Get it down to 30mV and your amp will be clrean  Smiley

+1
Logged
My website

TW Express build
BM HRM build
Prinzetone build
JD0x0
Sr. Member
****
Offline Offline

Gender: Male
Posts: 298


Happy Hour Hero


View Profile
« Reply #4 on: September 10, 2009, 08:16:43 PM »
thanks guys. i'll check the bias. this amp just gets so much power tube distortion. if i crank the master on the clean channel it gets past vintage marshall territory gain wise.
Logged
It's true i've lost my marbles and i can't remember where i put them.
René F
Newbie
*
Offline Offline

Posts: 47


View Profile
« Reply #5 on: September 11, 2009, 07:32:39 AM »
Quote from: JD0x0 on September 10, 2009, 08:16:43 PM
thanks guys. i'll check the bias. this amp just gets so much power tube distortion. if i crank the master on the clean channel it gets past vintage marshall territory gain wise.

You may also want to check the internal OD trimmer... From your describsion it sounds like it set way to high
Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #6 on: September 11, 2009, 08:07:37 AM »
Quote from: René F on September 11, 2009, 07:32:39 AM
Quote from: JD0x0 on September 10, 2009, 08:16:43 PM
thanks guys. i'll check the bias. this amp just gets so much power tube distortion. if i crank the master on the clean channel it gets past vintage marshall territory gain wise.
You may also want to check the internal OD trimmer... From your describsion it sounds like it set way to high

In clean mode?  Lips Sealed
Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
René F
Newbie
*
Offline Offline

Posts: 47


View Profile
« Reply #7 on: September 11, 2009, 09:29:14 AM »
Quote from: bluesfendermanblues on September 11, 2009, 08:07:37 AM
Quote from: René F on September 11, 2009, 07:32:39 AM
Quote from: JD0x0 on September 10, 2009, 08:16:43 PM
thanks guys. i'll check the bias. this amp just gets so much power tube distortion. if i crank the master on the clean channel it gets past vintage marshall territory gain wise.
You may also want to check the internal OD trimmer... From your describsion it sounds like it set way to high

In clean mode?  Lips Sealed

Hehe maybe i should read the whole thread next time... Just read "past vintage marshall territory gain..." my fault... of course the OD-trimmer has no effect on the clean channel... Smiley
Logged
wyatt
Guest
« Reply #8 on: September 12, 2009, 07:46:28 PM »
Quote from: JD0x0 on September 10, 2009, 08:16:43 PM
thanks guys. i'll check the bias. this amp just gets so much power tube distortion. if i crank the master on the clean channel it gets past vintage marshall territory gain wise.

Honestly, I avoided posting this earlier because I figured there were people with more experience with the D*mble/Overtone that would bring it up.  I know it's been mentioned at this forum before by a few people, including Nik.

If you're cranking the Master Volume, you're doing it wrong.  The D*mble style preamp/master doesn't work like most MV amps.

For maximum clean headroom, you want the Master Volume around 11-12 o'clock and the channel Volume around 12-3 o'clock. 

I can't remember why this is, and can't find a reference why it works this way online, but it's one of many D*mble ODS quirks everyone passes on to one another. 

Somewhere I'm sure you can find a site or post with recommended D*mble ODS settings that you can apply toward the Ceriatone OTS.

Put for now, Master Volume around 11-12 o'clock, Volume somewhere between 12-3 o'clock.
« Last Edit: September 12, 2009, 07:48:35 PM by wyatt » Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #9 on: September 12, 2009, 09:08:39 PM »
My master goes to 3 o'clock before overdrive - with a strat and volume on 6½ !! Grin
Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
JD0x0
Sr. Member
****
Offline Offline

Gender: Male
Posts: 298


Happy Hour Hero


View Profile
« Reply #10 on: September 12, 2009, 11:00:26 PM »
Quote from: wyatt on September 12, 2009, 07:46:28 PM
Quote from: JD0x0 on September 10, 2009, 08:16:43 PM
thanks guys. i'll check the bias. this amp just gets so much power tube distortion. if i crank the master on the clean channel it gets past vintage marshall territory gain wise.

Honestly, I avoided posting this earlier because I figured there were people with more experience with the D*mble/Overtone that would bring it up.  I know it's been mentioned at this forum before by a few people, including Nik.

If you're cranking the Master Volume, you're doing it wrong.  The D*mble style preamp/master doesn't work like most MV amps.

For maximum clean headroom, you want the Master Volume around 11-12 o'clock and the channel Volume around 12-3 o'clock. 

I can't remember why this is, and can't find a reference why it works this way online, but it's one of many D*mble ODS quirks everyone passes on to one another. 

Somewhere I'm sure you can find a site or post with recommended D*mble ODS settings that you can apply toward the Ceriatone OTS.

Put for now, Master Volume around 11-12 o'clock, Volume somewhere between 12-3 o'clock.

i know this is a preamp distortion amp. but if i had my master at 12-3 oclock like you said the clean channel would not be clean at all
Logged
It's true i've lost my marbles and i can't remember where i put them.
wyatt
Guest
« Reply #11 on: September 12, 2009, 11:20:08 PM »
Quote from: JD0x0 on September 12, 2009, 11:00:26 PM
Quote from: wyatt on September 12, 2009, 07:46:28 PM
Quote from: JD0x0 on September 10, 2009, 08:16:43 PM
thanks guys. i'll check the bias. this amp just gets so much power tube distortion. if i crank the master on the clean channel it gets past vintage marshall territory gain wise.

Honestly, I avoided posting this earlier because I figured there were people with more experience with the D*mble/Overtone that would bring it up.  I know it's been mentioned at this forum before by a few people, including Nik.

If you're cranking the Master Volume, you're doing it wrong.  The D*mble style preamp/master doesn't work like most MV amps.

For maximum clean headroom, you want the Master Volume around 11-12 o'clock and the channel Volume around 12-3 o'clock. 

I can't remember why this is, and can't find a reference why it works this way online, but it's one of many D*mble ODS quirks everyone passes on to one another. 

Somewhere I'm sure you can find a site or post with recommended D*mble ODS settings that you can apply toward the Ceriatone OTS.

Put for now, Master Volume around 11-12 o'clock, Volume somewhere between 12-3 o'clock.

i know this is a preamp distortion amp. but if i had my master at 12-3 oclock like you said the clean channel would not be clean at all

I said Master at 11-12 o'clock...clean channel Volume at 12-3 o'clock. 

I'm just repeating what I've read a dozen or more times, including here.
Here is a whole thread on the matter...
http://ceriatoneforum.com/index.php?topic=890.0
« Last Edit: September 12, 2009, 11:24:28 PM by wyatt » Logged
JD0x0
Sr. Member
****
Offline Offline

Gender: Male
Posts: 298


Happy Hour Hero


View Profile
« Reply #12 on: September 13, 2009, 03:07:38 AM »
my clean volume is at 12 oclock and my master never goes above 9 oclock because it just breaks up too much
Logged
It's true i've lost my marbles and i can't remember where i put them.
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #13 on: September 13, 2009, 05:55:49 AM »
Which is why you need to check your bias   :Smiley .............. Have you done that Huh?
Get your bias down to 30-35 mV

If this doesnt help you have an error in your amp, somewhere   Embarrassed
Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.