Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2024, 08:35:26 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  HRM - Will high plate voltage make the highs sound harsh?		 « previous next »
Pages: [1] Go Down Print
Author Topic: HRM - Will high plate voltage make the highs sound harsh?  (Read 3300 times)
Franc
Jr. Member
**
Offline Offline

Gender: Male
Posts: 72



View Profile WWW
« on: February 07, 2009, 06:49:52 PM »
Just finished an HRM.
Wallvoltage is about 230V over here and I used the 220V tap on the PT, so my filament voltage is 6.4V with all tubes installed.
Plate voltage on the 6L6s is about 470V.
I think that is a bit higher than values I read on this forum...

Can this be a problem? The amp has a lot more highs than on the videos I see on youtube, can this be caused by the (overall) higher voltages in the amp?
I am afraid that if I switch to the 240V tap on the PT, my filament voltage will drop to 6.1V which is very low. I always build by the rule that filament voltage should not be lower than 6.3V.

Any suggestions for smoothing out the highs?
Logged
erwin_ve
Guest
« Reply #1 on: February 07, 2009, 07:29:19 PM »
Hi Franc, Jij hier ook? (Vernet 2x12BB cab owner)

I 've spent lots of hours trying things out;

* filament wires; do it the fender way.
* Make sure plate and cathode wires stay away from filament wires.
* In original dumble's the cathode and plate (from pin 3, 6 and 8 at v1 and v2) are running parralel when going to the board(touching each other), this is smoothing out the highs.
« Last Edit: February 07, 2009, 07:38:44 PM by erwin_ve » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.