Welcome, Guest. Please login or register.
Did you miss your activation email?
November 24, 2024, 03:21:10 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  help switching chanels with a midi relay		 « previous next »
Pages: [1] Go Down Print
Author Topic: help switching chanels with a midi relay  (Read 8110 times)
Tahoebrian5
Newbie
*
Offline Offline

Posts: 19


View Profile
« on: August 19, 2012, 09:52:13 PM »
Hey all, I'm wanting to make plug for the footswitch jack that I can hookup to my TC Electronics G system. The G system has a relay output for amp channel switching.. Basically I have two 1/4 jacks coming out of the G that the G will either open or close depending on how I program it. It seems like a fairly simple task to create a custom cable that has two 1/4" jacks on one side and the 5 wire midi connector on the other. My question is if I'm reading the schematic correctly.. in order to switch channels I just connect pin 4 (or pin 2 for overdrive) to ground correct? The 12v power is not needed correct?

Thanks!
Logged
Kevster
Jr. Member
**
Offline Offline

Posts: 90


View Profile
« Reply #1 on: September 17, 2016, 04:07:03 PM »
Call this a bump...

I want to do same thing that original poster wanted to do, but with a Voodoo Labs GCX. I'm tired of dancing for a lead... Anybody else got the OD/PAB midi latched successfully?

I'm 100% midi for all conventional pedals, unless I'm using volume or wah (obviously with these two). I've used the onboard OD/PAB in my OTS as a lead channel, but it just makes sense to use it midi. I use a volume pedal (in the effects loop) for boost, and I have sometimes use a combination of OD pedals in conjunction with the OD/PAB.

Anybody already making cables for the OTS 5-pin to work with two switcher channels (1/4")? I'm in a condominium now and I have all my tools in storage until my wife and I buy again (or maybe longer if we buy sans garage...). If not, anybody already have a schematic?
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.