|
Title: HELP! my OTS PT doesn't fit the chassis!! Post by: parrosa on September 29, 2013, 11:45:25 PM Hi everyone,
just got an OTS kit through TRM audio, Slovenia. The transformers were sold by TRM, brand is PETEZE. As you can see in the picture, the chassis holes don't fit with PT holes :-\ is there a way to fix this? Has anybody come across this problem yet? Title: Re: HELP! my OTS PT doesn't fit the chassis!! Post by: sduck on September 30, 2013, 03:58:01 AM Mine didn't fit exactly, sort of like yours. Some work with a drill press, and some washers and you'll be fine.
Title: Re: HELP! my OTS PT doesn't fit the chassis!! Post by: mcinku on September 30, 2013, 05:47:51 AM I use TRM transformers all the time and there's nothing to it. You will have to take your drill out and fix those holes. OT and choke will fit just fine.
;) Title: Re: HELP! my OTS PT doesn't fit the chassis!! Post by: parrosa on September 30, 2013, 10:42:38 AM Thanks for the info, now i have the courage to drill the thing. Ill post the results afterwards.
Title: Re: HELP! my OTS PT doesn't fit the chassis!! Post by: mcinku on September 30, 2013, 10:48:06 AM Just be careful... drill tend to slip if you're in a hurry, so take it slow. I did it many time alu or steel, so nothing to it really.
;) Title: Re: HELP! my OTS PT doesn't fit the chassis!! Post by: parrosa on September 30, 2013, 02:11:39 PM Thanks, tried the drill, but went for the file instead. Not so bad, actually. much easier than pedal enclosures :)
|