hrm bluesmaster,od channel stay's clean ? need advices !!

pruns
Newbie

Offline

Posts: 4

hrm bluesmaster,od channel stay's clean ? need advices !!

« on: April 11, 2011, 08:17:08 PM »

HI everyone !
Well , i have been ordering a 100w bm that i built myself .
I do have a problem with the od channel : it stays clean ! it sounds loud but stay's clean , no od here !! at the very begining od have been working for few hours at a jam with friends ...then nothing .. Huh?

on an other day it was working for few minutes and...goodbye ! it's a bit disapointing !! i have been checking soldering , everything seem's to be ok ..
Any advices are welcome !! i'm not an ingenior ! thank you very much ! (sorry for my english !)


	Logged

T Wilcox
Sr. Member

Offline

Gender: Male

Posts: 399

Re: hrm bluesmaster,od channel stay's clean ? need advices !!

« Reply #1 on: April 11, 2011, 08:47:01 PM »

If you can take pics of amp guts and post I could maybe help you.
Good thing is something is working, so most likely it will be something simple I hope.
Have you tried swapping tubes around?
v1 = clean ( v1 is the furthest from the power tubes or first preamp tube )
v2 = od
maybe swap the 2 and see if anything changes
That would be the 1st thing Id try.

If it isnt tubes, post the pics and someone here should be able to point you in right direction.

Todd


	Logged

Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550 ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat

plasticvonaband
Hero Member

Offline

Gender: Male

Posts: 747

Pickin and Grinnin since 1989

Re: hrm bluesmaster,od channel stay's clean ? need advices !!

« Reply #2 on: April 11, 2011, 09:25:57 PM »

Have you looked at the OD trim? It might be down or may have come loose. Also, it is possible that a tube went bad. Also, the clean channel gain affects the drive channel as well.


	Logged

Overdrive is like peanut butter. Some like it crunchy, some like it creamy.
Bluesmaster 50 2x12 combo and some guitars.

SoundPerf
Sr. Member

Offline

Gender: Male

Posts: 392

Re: hrm bluesmaster,od channel stay's clean ? need advices !!

« Reply #3 on: April 12, 2011, 12:41:21 AM »

Are your relays in correctly? This sort of sounds like a problem someone had with a older version of the amp where it was easy to get them backwards. It seems now it would be rather difficult to get them backwards, but maybe not.

Also, make sure your soldering around the relay boards and rectifier boards is neat. No solder running underneath & between the two boards.

Go to this site and watch from number 58. Or all of it if you want. Some useful info there.
http://www.overtonehrm.com/video/default.html


« Last Edit: April 12, 2011, 12:48:58 AM by SoundPerf »	Logged

Chris

Ceriatone HRM 50
w/self built Dumblelator
Avatar 2X12 w/WGS ET-65 & Veteran 30
TC Electronic 2290
2001 PRS McCarty
2010 PRS 513 Swamp Ash
Tacoma JK50C
Seagull S12+

pruns
Newbie

Offline

Posts: 4

Re: hrm bluesmaster,od channel stay's clean ? need advices !!

« Reply #4 on: April 13, 2011, 11:50:58 AM »

thank you all for your answers !
I've allready try differents combinations with the preamp tubes and the problem is still here...about the relays we have chek them with a multimeter and the're working correctly ...
I will send pictures as soon as possible , my amp is now at a friend's house trying to fix the problem ( is much better than me in buiding amps) Tongue

I will let you know how things are going !
Once again thanks a lot .


	Logged

Pages: [1]

« previous next »

	Welcome, Guest. Please login or register. Did you miss your activation email? April 28, 2024, 05:39:42 AM

News: Ceriatone Forums are up and running!!! Guests please register Note: If you want to help you can to keep the forums alive. Do you want to advertise on this forum ? Send me a private message.