Welcome, Guest. Please login or register.
Did you miss your activation email?
May 03, 2024, 10:07:44 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Correction		 « previous next »
Pages: [1] Go Down Print
Author Topic: Correction  (Read 5691 times)
dotyduke
Newbie
*
Offline Offline

Posts: 37



View Profile WWW
« on: July 30, 2008, 11:58:45 PM »
On the ceriatone web site there is a picture of a completed overtone with the ohm switch wired backwards.  The orange wire is in the 4 ohm spot and the green wire is in the 16 ohm spot.  Correct me if I'm wrong.  This is a pic from the ceriatone site:
« Last Edit: July 31, 2008, 12:00:52 AM by dotyduke » Logged
Metro amp forum member.
nickm57
Jr. Member
**
Offline Offline

Posts: 66


View Profile
« Reply #1 on: July 31, 2008, 10:33:14 AM »
Any way of checking with a multimeter?
Logged
dotyduke
Newbie
*
Offline Offline

Posts: 37



View Profile WWW
« Reply #2 on: July 31, 2008, 12:09:55 PM »
Quote from: nickm57 on July 31, 2008, 10:33:14 AM
Any way of checking with a multimeter?
You can check with a meter but you can see in the pic that it is in the 4 ohm position if it was wired correct Shocked
« Last Edit: July 31, 2008, 12:18:41 PM by dotyduke » Logged
Metro amp forum member.
nickm57
Jr. Member
**
Offline Offline

Posts: 66


View Profile
« Reply #3 on: July 31, 2008, 01:24:24 PM »
I was not sure how to check with the multimeter.
I've just built mine but can't remember what diagram I used to wire it. But I get 0.9 1.0 1.2 ohms on the ot on 4 8 16 settings. This sound right?

But I think the pic is right. It shows the orange wire of the ot (16 ohm tap ) engaged. the other orange wire is the common to the speaker jack.
The switch would be turned to the right (facing the back of the amp) to 16ohm ...toward the foot switch jack.
I had more problems with the foot switch and defeat switch wiring.... 
Logged
dotyduke
Newbie
*
Offline Offline

Posts: 37



View Profile WWW
« Reply #4 on: July 31, 2008, 08:29:51 PM »
Quote from: nickm57 on July 31, 2008, 01:24:24 PM
I was not sure how to check with the multimeter.
I've just built mine but can't remember what diagram I used to wire it. But I get 0.9 1.0 1.2 ohms on the ot on 4 8 16 settings. This sound right?

But I think the pic is right. It shows the orange wire of the ot (16 ohm tap ) engaged. the other orange wire is the common to the speaker jack.
The switch would be turned to the right (facing the back of the amp) to 16ohm ...toward the foot switch jack.
I had more problems with the foot switch and defeat switch wiring.... 

Yes but if you look at the back panel of the amp in the pic, it will show 4ohms
Logged
Metro amp forum member.
dotyduke
Newbie
*
Offline Offline

Posts: 37



View Profile WWW
« Reply #5 on: July 31, 2008, 08:39:26 PM »
Quote from: dotyduke on July 31, 2008, 08:29:51 PM
Quote from: nickm57 on July 31, 2008, 01:24:24 PM
I was not sure how to check with the multimeter.
I've just built mine but can't remember what diagram I used to wire it. But I get 0.9 1.0 1.2 ohms on the ot on 4 8 16 settings. This sound right?

But I think the pic is right. It shows the orange wire of the ot (16 ohm tap ) engaged. the other orange wire is the common to the speaker jack.
The switch would be turned to the right (facing the back of the amp) to 16ohm ...toward the foot switch jack.
I had more problems with the foot switch and defeat switch wiring.... 

Maybe I'm wrong but I could sware the amp got louder when I switched to 4 ohms.  I will check this out.
Logged
Metro amp forum member.
nickm57
Jr. Member
**
Offline Offline

Posts: 66


View Profile
« Reply #6 on: July 31, 2008, 11:45:43 PM »
in the ceriatone pictures?
the wiper on the switch moves in  parallel to the knob.
both point up. The picture you posted the wiper is to the left. If you look at the back panel of the amp the knob will be to the right toward 16ohm.
« Last Edit: August 01, 2008, 08:18:05 AM by nickm57 » Logged
dotyduke
Newbie
*
Offline Offline

Posts: 37



View Profile WWW
« Reply #7 on: August 01, 2008, 04:14:34 PM »
That is correct but I think the transformer was wired internally backwards.  On my amp going into a 16 ohm cab, with the switch set to 4 ohms is louder than when it is set to 16 ohms.  The orange wire should be 16ohm and the green 4 ohm but I think the color code is wrong. Huh?
« Last Edit: August 01, 2008, 04:20:17 PM by dotyduke » Logged
Metro amp forum member.
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.