Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2024, 05:36:10 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Fizzyness		 « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Fizzyness  (Read 15992 times)
Sander
Newbie
*
Offline Offline

Posts: 12


View Profile
« on: April 05, 2010, 01:38:44 PM »
Hi all,

The cleans of my HRM 100w amp are really nice, but I can't really dial out the high end fizzyness when I use a les paul. I tried the amps distortion, pretty fizzy. I tried pedals, and the more gain, the more fizzy it got.

I tried different settings (Lower preamp gain, higher output amp gain) but is really didn't make much of a difference.

So my question:

Is the HRM just (a bit) fizzy on the high end, or is there something wrong?

I tried the speakers with another top and I had no fizzynes, so it's not the speakers (g12 65)

Please let me know
Logged
jmernyk
Newbie
*
Offline Offline

Posts: 18


View Profile
« Reply #1 on: April 05, 2010, 03:14:13 PM »
Have you tried setting the gain knob on the back of the chassis at 10 O'clock or less? Adjusted the HRM trimpots inside? Set the PI trimmer?
« Last Edit: April 05, 2010, 03:15:56 PM by jmernyk » Logged
erwin_ve
Guest
« Reply #2 on: April 05, 2010, 03:21:51 PM »
Hi Sander,

Ask Frank to adjust the HRM tone stack. It's ultra sensitive for different guitars.
This is gotto be done while you play.

Groeten,

Erwin
« Last Edit: April 05, 2010, 03:34:17 PM by erwin_ve » Logged
Sander
Newbie
*
Offline Offline

Posts: 12


View Profile
« Reply #3 on: April 05, 2010, 03:54:24 PM »
Quote from: jmernyk on April 05, 2010, 03:14:13 PM
Have you tried setting the gain knob on the back of the chassis at 10 O'clock or less? Adjusted the HRM trimpots inside? Set the PI trimmer?

jmernyk; I mainly use overdrive pedals for my distortion sound, I never liked using distortion from the amp itself. The gain knob on the back wouldn't help because I use pedals (am i right?). Haven't adjust the trimpots, don't know what a PI trimmer is (please explain!)

erwin_ve; That might be a good idea, I don't really know anything about the HRM tonestack. Do you really think it will make a difference? I want the fizzyness to be gone, with a strat AND with a les paul.
Can I adjust the tonestack myself or do you suggest going to Franc.


Thanks a lot for your comments guys!! Smiley
Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #4 on: April 05, 2010, 04:56:22 PM »
The HRM has a pretty fizzy OD high end. Most of us are attracted to the Dumble type amps because of Robben Fords cremy sounds. However, remember that Robben Ford use a a Dumbleator (in series mode) connected with long connection wires to/from his TC2290. This effectively trims offs OD highs.

Alternatively to a dumbleator (in series mode) I use a 1n capacitor in series with a 150k resistor soldered to OD master pot in and ground. This trims off the fizzy highs in my HRM amp.
Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
erwin_ve
Guest
« Reply #5 on: April 05, 2010, 05:14:01 PM »
Hi Claus, You're probably right. My HRM has a built in dumblelator. No fizzy sound with it. So you're basically have a fixed ground bleed?
Logged
Sander
Newbie
*
Offline Offline

Posts: 12


View Profile
« Reply #6 on: April 05, 2010, 05:34:37 PM »
I use a kleinulator...  It's not a dumbleator, I know, but i'm just saying.

erwin_ve how did you get a build in dumbleator?? And could you please answer my previous questions? I'd appreciate that!
Logged
erwin_ve
Guest
« Reply #7 on: April 05, 2010, 05:50:06 PM »
Quote from: Sander on April 05, 2010, 05:34:37 PM
I use a kleinulator...  It's not a dumbleator, I know, but i'm just saying.

erwin_ve how did you get a build in dumbleator?? And could you please answer my previous questions? I'd appreciate that!

My HRM is built in a old Peavey Classic VT chassis. Since there was plenty of room I built in a dumblelator too.

I don't know what Franc did to your circuit that your pedals also sound fizzy, really you better ask him. There are multiple things that can cause it; bright cap on the clean master, wrong position of signal wires in relation to the heater wires. Bright settings on the Klein. etc. Most of it is tech talk and would take a long time to explain.
The HRM tone stack are 3 trimpots that do the treble mid and bass for your overdrive channel. But it has no effect if you use the clean channel.
« Last Edit: April 05, 2010, 05:54:50 PM by erwin_ve » Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #8 on: April 05, 2010, 07:14:08 PM »
Quote from: erwin_ve on April 05, 2010, 05:14:01 PM
Hi Claus, You're probably right. My HRM has a built in dumblelator. No fizzy sound with it. So you're basically have a fixed ground bleed?

Yes, exactly

I use 1n + 150k in my HRM
and
1n + 180k in my high plate non-HRM

I have found the values by trial and error comparing with the sound of having the dumblelator in the circuit.
« Last Edit: April 05, 2010, 07:16:06 PM by bluesfendermanblues » Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
Sander
Newbie
*
Offline Offline

Posts: 12


View Profile
« Reply #9 on: April 05, 2010, 08:39:22 PM »
Would a modification like this also work for the clean channel? (to get rid  of the fizzyness with pedals?)
« Last Edit: April 05, 2010, 09:07:08 PM by Sander » Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #10 on: April 06, 2010, 05:38:45 AM »
Quote from: Sander on April 05, 2010, 08:39:22 PM
Would a modification like this also work for the clean channel? (to get rid  of the fizzyness with pedals?)

Yes it would. However, try a trimmer in series with a capacitor in order to find the sweet spot. When you have found a sound you like, simply measure the trimmer value and put a an ordinary resistor of same value in  the circuit.

If you amp is rather new. Have a little patience with the amp. It takes 50-100 hours to break in, which in effect will soften the tone. You can simulate this with the above mentioned trimmer. And adjust the trimmer on a weekly basis until the amp has settled in. Pretty smart huh?
Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
Franc
Jr. Member
**
Offline Offline

Gender: Male
Posts: 72



View Profile WWW
« Reply #11 on: April 10, 2010, 07:22:05 AM »
Quote from: bluesfendermanblues on April 05, 2010, 04:56:22 PM
Alternatively to a dumbleator (in series mode) I use a 1n capacitor in series with a 150k resistor soldered to OD master pot in and ground. This trims off the fizzy highs in my HRM amp.



Hi, we might try this mod to see if it helps in this amp. Do you mean the 'Level' pot?
Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #12 on: April 10, 2010, 08:06:34 AM »
The OD master pot
Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
Franc
Jr. Member
**
Offline Offline

Gender: Male
Posts: 72



View Profile WWW
« Reply #13 on: April 10, 2010, 08:28:51 AM »
Okay, but that only works on the clean channel, so how will that help the OD channel?
Logged
erwin_ve
Full Member
***
Offline Offline

Gender: Male
Posts: 158



View Profile
« Reply #14 on: April 10, 2010, 11:16:53 AM »
Hi Franc,
Is it possible you have a marshall style heater wiring? If so; make sure all the wires to the tube(cathode and plate) have 1cm space related to the heater wires.
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.