|
Title: DIY Head Enclosure Cab for OTS 50 Post by: jojo169 on February 25, 2014, 03:06:40 PM Hi guys, I am thinking to build my own head cab for OTS50. But since I want it to be as light as possible, I plan to use 15mm plywood (0.59"). I know lot of people use 3/4". What d you guys think if I use 15mm? Is it sill looking good?
Title: Re: DIY Head Enclosure Cab for OTS 50 Post by: sduck on February 26, 2014, 04:43:03 AM That sounds fine to me - 15mm is pretty thick stuff. And it's plywood, which has a lot of structural integrity, so it should be fine. And it's DIY, so if it doesn't work out, you can just do it again!
Title: Re: DIY Head Enclosure Cab for OTS 50 Post by: GuitarHack on March 04, 2014, 05:13:24 AM I did that for another head. Its OK, but you can round the edges and corners better with 3/4 inch stock. Have you considered 3/4 pine ?
I made one head cab of pine and it worked out fine. I only used the thin ply because I wanted to use up some stuff I had lying around. I wouldn't do it again, though. |