|
Title: Ceriatone OTS Loop/ Master volume problem ala Pickmaster Post by: stratman70 on July 21, 2015, 12:52:25 PM Hey there all!
I posted this in another forum to no avail. just joined up here. I have a Ceriatone OTS 50 and I'm running a digitech RP100 though the loop. It seems the Master Volume has no increase when turning it up. I run a TC HOF reverb and this runs fine through the loop, the master volume works like it should. I ran my TC Dark Matter through the loop, and I have the same problem as the digitech. I'm almost 100% sure this poblem has only just started happening, as I have been using the amp with the RP in the loop for ages and never noticed this problem until now. Am I missing something? Do I need a Kleinulator? I have seen that "pickmaster" guy running his RP with what I assume is without my issue. I run the output of the RP at 99% like "pickmaster" has recommended for full volume. I'm at a total loss with this? Any ideas would be appreciated! Cheers! Title: Re: Ceriatone OTS Loop/ Master volume problem ala Pickmaster Post by: Hayden on August 12, 2015, 10:07:31 PM The output of your effects unit will act as the Master Volume now.
|