|
Title: Build advice road tuff Post by: nickm57 on June 26, 2008, 05:16:44 AM Just starting on my overtone.
I plan on using this amp to tour. Has anyone used "locktite" on all the screws or are the lock washers and the aluminum casing enough to keep it all secure? thanks nick Title: Re: Build advice road tuff Post by: hywelg on June 26, 2008, 08:39:25 AM The thread sizes are a little on the small size for loctite, you might well have problems disassembling if you ever need to. A simple and straight forward u/g when building would be to use nylock nuts along with the anti-vibration washers. I would also recommend you put nylon or rubber spacer washers for every circuit board that has a blanking board between it and the chassis i.e. the FET and power supply boards.
I'm sure there are other u/g's that others will chip in with. |