Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2024, 05:25:07 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Need help with coax RG-147		 « previous next »
Pages: [1] Go Down Print
Author Topic: Need help with coax RG-147  (Read 6829 times)
T Wilcox
Sr. Member
****
Offline Offline

Gender: Male
Posts: 399



View Profile
« on: March 03, 2011, 02:16:08 PM »
Hello all
In middle of build and started to run the RG-147 mini coax only to find it is a pain to lead dress. Any tips or suggestions on stripping.
I read one post somewhere that says to strip about 2  inches then unbraid the shield. I cant get the shield unbraided without it getting balled up at bottom and then strands are breaking off. Another method I read was to solder a lead onto shield to extend it.
please help
Thank you
Todd
Logged
Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550  ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« Reply #1 on: March 03, 2011, 02:32:23 PM »
Yes, expose about 20mm of the braid, unwind it, twist it together and solder a piece of wire to it. Cover the  solder joint  and the exposed braid with heatshrink. If you have two adjacent shields to do twist them both together and use heatshrink to hold both wires together.

At the other end cut the shield off flush with the insulator and cover with heatshrink. (it isn't connected)
Logged
T Wilcox
Sr. Member
****
Offline Offline

Gender: Male
Posts: 399



View Profile
« Reply #2 on: March 03, 2011, 02:55:19 PM »
Thanks for the fast response Hywelg.
I will try that.
Logged
Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550  ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat
SoundPerf
Sr. Member
****
Offline Offline

Gender: Male
Posts: 392



View Profile
« Reply #3 on: March 03, 2011, 08:07:59 PM »
Also, use care when removing the insulation not to nick the braid. It is very fragile and will cause it to break quickly. Same goes for the core too. And actually if you do nick the other end it makes it easy to get a clean break of the shield. I actually use a "spinning type" wire coax stripper to do this. You can use for for everything, but be careful not to cut what you don't want to.

There was a link to a little photo step by step of how to dress the ground lead for the coax, but I can't find it now. Anyone know where it is?
Logged
Chris

Ceriatone HRM 50
w/self built Dumblelator
Avatar 2X12 w/WGS ET-65 & Veteran 30
TC Electronic 2290
2001 PRS McCarty
2010 PRS 513 Swamp Ash
Tacoma JK50C
Seagull S12+
sduck
Full Member
***
Offline Offline

Gender: Male
Posts: 173



View Profile
« Reply #4 on: March 03, 2011, 10:45:09 PM »
The coax that came with my kit a few months ago was particularly hard to unwind - there was some sort of goo in and around the ground sheathing that made it really hard to unwind. I had some belden coax of the same specs here that I ended up using for a lot of my coax instead. Unwinding the ground braid is a pita even without that goo in there - just be patient and try to be neat doing it.
Logged
SoundPerf
Sr. Member
****
Offline Offline

Gender: Male
Posts: 392



View Profile
« Reply #5 on: March 04, 2011, 03:53:14 AM »
Quote from: sduck on March 03, 2011, 10:45:09 PM
The coax that came with my kit a few months ago was particularly hard to unwind - there was some sort of goo in and around the ground sheathing that made it really hard to unwind. I had some belden coax of the same specs here that I ended up using for a lot of my coax instead. Unwinding the ground braid is a pita even without that goo in there - just be patient and try to be neat doing it.
Yeah, mine is like that too. I take an xacto and carefully cut down the middle and then peel it off instead of trying to slide it off. I think it's there to serve a benificial purpose and not just a manufacturing byproduct, but not exactly sure what. (anti-oxidant/moistore barrier, or to hold the shield tight together....)
Logged
Chris

Ceriatone HRM 50
w/self built Dumblelator
Avatar 2X12 w/WGS ET-65 & Veteran 30
TC Electronic 2290
2001 PRS McCarty
2010 PRS 513 Swamp Ash
Tacoma JK50C
Seagull S12+
T Wilcox
Sr. Member
****
Offline Offline

Gender: Male
Posts: 399



View Profile
« Reply #6 on: March 08, 2011, 02:59:59 PM »
FYI to any future builders
If you order a kit it may be useful to source your own RG-147. I scrapped about 10 inches trying to lead dress the RG-147 that came with kit and had trouble with the shield wires bunching up and breaking which left me short wire and had to order more. I ordered from Hammond and once received I had no problems stripping this coax and lead dressing.
I dont know if the coax that came with the kit was just a bad batch or what! Huh?
Logged
Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550  ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat
T Wilcox
Sr. Member
****
Offline Offline

Gender: Male
Posts: 399



View Profile
« Reply #7 on: March 08, 2011, 03:29:56 PM »
oops meant to say Hoffman not Hammond
Logged
Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550  ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat
boldaslove6789
Sr. Member
****
Offline Offline

Gender: Male
Posts: 310


I'm never too loud, HAHAHA


View Profile WWW
« Reply #8 on: March 08, 2011, 04:57:28 PM »
Quote from: T Wilcox on March 08, 2011, 02:59:59 PM
FYI to any future builders
If you order a kit it may be useful to source your own RG-147. I scrapped about 10 inches trying to lead dress the RG-147 that came with kit and had trouble with the shield wires bunching up and breaking which left me short wire and had to order more. I ordered from Hammond and once received I had no problems stripping this coax and lead dressing.
I dont know if the coax that came with the kit was just a bad batch or what! Huh?


 You can get a 100ft roll of RG-178 50ohm @ Apex Jr. for $15 (Minimum order is $20 + shipping is like $8)

 http://www.apexjr.com/wire.html
Logged
-Greg D. Clark

Stop searching for tone, INVENT IT!

http://www.funkymunkpedals.com/
Pedals That Speak!

 http://www.youtube.com/GDClarkProject
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.