Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2024, 12:21:48 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  British Style
| |-+  JTM 45, 50
| | |-+  How to remove Mastervolume and FX-loop
« previous next »
Pages: [1] Go Down Print
Author Topic: How to remove Mastervolume and FX-loop  (Read 7624 times)
Vinni
Newbie
*
Offline Offline

Posts: 3


View Profile
« on: August 26, 2011, 10:02:48 PM »

Hi,

I've bought a Ceriatone JTM45 with Maservolume and FX-loop.
I'd like to remove these....

How do you do that?

Thanks,

Vinni
Logged
wyatt
Guest
« Reply #1 on: August 27, 2011, 04:25:11 AM »

Pointless to remove the FX loop.  The Ceriatone loop is a simple "interrupt" FX loop.  When nothing is plugged in, the circuit works EXACTLY like the loop wasn't ever there, you gain nothing by removing it except some leftover holes. 
But to remove it, it's inserted between the middle lug of the Treble pot and the .022uF cap before the phase inverter tube (V3) tube.

http://ceriatone.com/images/mods/FX-Loop.jpg

Those wires get snipped and replaced with a jumper that runs from the pot to the cap.

For the Master Volume?  This is stuff, it's not quite as unobtrusive as the FX loop.  If it's a Post-Phase-Inverter Master Volume (PPIMV), I would say, "keep it."  On "10" it's like it was never there and if you need it (very few venues can be played with out attenuation these days), it's tone will be as good as any attenuator, power scaling or other solution.  You can tell a PPIMV because it'll have a dual pot in the chassis, one for each side of the power amp push-pull set-up.

Even if it's not a PPIMV and just a typical pre-PI MV, I might or might not remove it.  Ultimately, that's key...why do you want to remove the MV and FX loop?  In what way are they bothering you?  If you have a legitimate, present gripe, then remove away.  But, most of the time, people go in and spend time and effort undoing things because of some bullshit, amp-purist hype about how these things are detrimental to tone.  In some cases, they can be, but for most part, not using the feature is the same as not having the feature.

I can't tell you how to remove it because there are a good dozen different ways to install one.

But compare you amp to the layout and this schematic and you should find where the extra parts were installed...

http://www.raw-sewage.net/images/jtm45.jpg
http://ceriatone.com/images/layoutPic/marshallLayout/JTM45ceriatone.jpg

Here is Nik's PPIMV mods he posts about...
http://ceriatone.com/images/mods/Type-2-MV.jpg
http://ceriatone.com/images/mods/Plexi50LeadPPIMVFrontCeriat.jpg

I believe pretty soon, Nik is only going to be building models with these features stock.
« Last Edit: August 27, 2011, 02:23:10 PM by wyatt » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.