|
Title: Hey folks Post by: kjarrime on March 19, 2009, 07:55:28 PM I am going to make me an BF Vibro champ from ceriatone. ;D
I can´t find anything that says, the kits come in 120V or 220V transformers. Hopefully it´s 220v as i live in Iceland, but just wanted to be sure, as many other companys have both 220v and 120v to chose from. ( even thos the 220v is allways more expensive ??? ) This will be my first amp project, know plenty of stuff about electricity and the high voltage danger. Hopefully this will go safe ::) Been reading alot on the internet about amp building and this company seems to have one of the best reputation, so i want to do it here! Title: Re: Hey folks Post by: René F on March 19, 2009, 09:07:51 PM Hi
If you check out the layout to the BF vibrochamp, you will see that there are two options on the power transformers primary :) (see ceriatone.com for layout) So you can solder it to be either 120 V or 240 V... And 240 V will be just fine for the 220 voltage you have at your disposal :) Good luck with the amp Regards René F Title: Re: Hey folks Post by: kjarrime on March 22, 2009, 04:18:32 PM Thx alot René! :D
|