Welcome, Guest. Please login or register.
Did you miss your activation email?
November 25, 2024, 01:10:21 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Website, Store
| |-+  General
| | |-+  Help connecting my Speaker Cabs to Dizzy 30. 		« previous next »
Pages: [1] Go Down Print
Author Topic: Help connecting my Speaker Cabs to Dizzy 30.  (Read 5462 times)
guitar1
Newbie
*
Offline Offline

Posts: 5


View Profile
« on: February 12, 2012, 08:29:15 PM »
Hi guys. I'm new to the forum though I'm on my 2nd Ceriatone (DC 30 clone).
I recently picked up 2 Matamp 1x12 cabinets to run my head through. The speakers in each of the cabs are Celestion V30's and rated at 8 ohms. Today at band rehearsal I plugged both cabs in together and adjusted the ohm selector to 4 ohms to allow for running the 2 cabs.
I inserted a speaker cable into each input in the back of the head then selected an input each on the cabs. (there are 2 unmarked inputs on each cabinet).
My problem is the volume is about 30% less when running both cabs rather than running the one, as I did last week, and ultimately did tonight.
Am I doing something wrong? The previous owner of the cabs ran a stereo wet/dry setup with the cabs, however all i want to do is just move a bit more air with the sound of 2 speakers rather than one. One cabinet is also open backed, if that makes a difference.
I am thinking of exchanging the 2 cabs for a Marshall 4x12 with Greenbacks. Is this overkill??
Logged
wyatt
Guest
« Reply #1 on: February 13, 2012, 05:24:48 PM »
My first guess would be that your cabs are out of phase with one another, though that seems unlikely if they are factory-wire cabs since they are both Matamp.

It sounds fine through each cab by itself?
« Last Edit: February 13, 2012, 05:26:57 PM by wyatt » Logged
guitar1
Newbie
*
Offline Offline

Posts: 5


View Profile
« Reply #2 on: February 13, 2012, 10:40:01 PM »
Quote from: wyatt on February 13, 2012, 05:24:48 PM
My first guess would be that your cabs are out of phase with one another, though that seems unlikely if they are factory-wire cabs since they are both Matamp.

It sounds fine through each cab by itself?


Hi yes it does, however it seems that there was some confusion regarding the ohms of one of the speakers and it was changed to a 8ohm from a 16. They are now both 8 ohms but this would suggest to me that perhaps they were not bought as a pair. Is it a big deal to get one re-wired so it's in phase?
Logged
wyatt
Guest
« Reply #3 on: February 14, 2012, 01:38:15 AM »
Quote from: guitar1 on February 13, 2012, 10:40:01 PM
Quote from: wyatt on February 13, 2012, 05:24:48 PM
My first guess would be that your cabs are out of phase with one another, though that seems unlikely if they are factory-wire cabs since they are both Matamp.

It sounds fine through each cab by itself?


Hi yes it does, however it seems that there was some confusion regarding the ohms of one of the speakers and it was changed to a 8ohm from a 16. They are now both 8 ohms but this would suggest to me that perhaps they were not bought as a pair. Is it a big deal to get one re-wired so it's in phase?

Not hard at all for someone who can solder.  Just swap the wires on the jack of the cabinet (you can swap at the speaker instead, but tools have a hbit of being dropped through speaker cones).
Logged
guitar1
Newbie
*
Offline Offline

Posts: 5


View Profile
« Reply #4 on: February 14, 2012, 10:30:17 AM »
Quote from: wyatt on February 14, 2012, 01:38:15 AM
Quote from: guitar1 on February 13, 2012, 10:40:01 PM
Quote from: wyatt on February 13, 2012, 05:24:48 PM
My first guess would be that your cabs are out of phase with one another, though that seems unlikely if they are factory-wire cabs since they are both Matamp.

It sounds fine through each cab by itself?


Hi yes it does, however it seems that there was some confusion regarding the ohms of one of the speakers and it was changed to a 8ohm from a 16. They are now both 8 ohms but this would suggest to me that perhaps they were not bought as a pair. Is it a big deal to get one re-wired so it's in phase?

Not hard at all for someone who can solder.  Just swap the wires on the jack of the cabinet (you can swap at the speaker instead, but tools have a hbit of being dropped through speaker cones).


Ahh, think I'll have a go at that tonight. I can solder pickups in guitars so speakers should be ok.
Thanks for your help>
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.