Welcome, Guest. Please login or register.
Did you miss your activation email?
March 29, 2024, 12:02:32 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  Website, Store
| |-+  General
| | |-+  Mains voltage - 245v down to 220V - mains regulator for House
« previous next »
Pages: [1] Go Down Print
Author Topic: Mains voltage - 245v down to 220V - mains regulator for House  (Read 11746 times)
Tone Control
Sr. Member
****
Offline Offline

Gender: Male
Posts: 274



View Profile
« on: March 23, 2011, 03:10:37 PM »

In the EU, mains voltage is supposed to be 220V:

......The EU decided, in its wisdom, to harmonise the UK standard mains voltage of 240v AC and the European standard of 220v AC, at 230v AC. Fine in theory but the costs of replacing all the supply equipment to deliver 230v was uneconomic (there being no advantage whatever in changing, other than ‘harmonisation’). So to avoid accusations of failure to harmonise, they simply fiddled with the legal voltage limits, nothing actually changed!.
The law now states 230v +10% -6%, thereby allowing the European 220v system to stay at 220v and UK to stay at 240v, yet both appear to be harmonised!
...............

UK amp makers seem to go with 240V, but amps from anywhere else sold here are set at 220V
I have read that most UK houses are supplied with 245v. I just checked mine - dead on 245v But I know it varies as demand changes, especially during peak periods

I've wondered how much this affects the tone.

Just now a company has just launched a product giving a domestic version of what's been used by large companies for a long while:
It's installed at the mains RCD board, and changes the house voltage to 220V (or less if you want to tweak it), and is constant.
This is sold to reduce household bills by 10%, it costs £300. http://www.vphase.co.uk/http://www.vphase.co.uk/

So if I got this, would amps from other countries sound better, woudl UK-made amps sound worse. They should at least be more consistent across the day I assume?

Cheers
Tone
Logged

Dr Tone Control, Strats mostly, prefer saturated clean tones, a little OD sometimes
BM50, JTM45, 36w EF86, DZ30, Expression, + non-Ceriatones (Matchless, Victoria, Wienbrock)
Just started with pedals a little after a 10 year purist spell, but usually just delay
T Wilcox
Sr. Member
****
Offline Offline

Gender: Male
Posts: 399



View Profile
« Reply #1 on: March 23, 2011, 03:31:33 PM »

That is very interesting. I often wonder from day to day if its my amp or my ears that are the problem when the amp seems to handle differntly. I will have to check mains on a good day and on a bad day to compare voltage difference.
In the US alot of people are using Furman power conditioners, Not sure if they make 220-240volt but I believe they keep the power at the right level as well. Have you tried anything like that?
Logged

Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550  ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat
Tone Control
Sr. Member
****
Offline Offline

Gender: Male
Posts: 274



View Profile
« Reply #2 on: March 23, 2011, 03:56:10 PM »

That is very interesting. I often wonder from day to day if its my amp or my ears that are the problem when the amp seems to handle differntly. I will have to check mains on a good day and on a bad day to compare voltage difference.
In the US alot of people are using Furman power conditioners, Not sure if they make 220-240volt but I believe they keep the power at the right level as well. Have you tried anything like that?

I've heard that US voltages are much less stable than in the UK, which is pretty good usually, but our village has occasional days where the voltage collapses to 130v or so, only a few times though.

I have not tried any so far. I would assume that if the voltage was too high, and this unit brought it down, then amp would take the power it needed, I can't see how the unit would have a reason to contrain current.

My main thought is not variation, but in "do all amps in the UK get too many volts?"
Mind you, once they have been biased here, I assume they would be OK anyway

Cheers
Tone
Logged

Dr Tone Control, Strats mostly, prefer saturated clean tones, a little OD sometimes
BM50, JTM45, 36w EF86, DZ30, Expression, + non-Ceriatones (Matchless, Victoria, Wienbrock)
Just started with pedals a little after a 10 year purist spell, but usually just delay
SoundPerf
Sr. Member
****
Offline Offline

Gender: Male
Posts: 392



View Profile
« Reply #3 on: March 23, 2011, 06:29:47 PM »

I think the short answer is anything that can keep the voltage constant and at the voltage the amp was designed is the ideal situation. I've been wanting to get a real AC regulator (Furman) for quite a while now. It's just that the true regulators are a bit pricey.

While the US's mains voltage can vary the issue I find is that it runs a bit higher 125v instead of 120v. And this is something I've been just now pondering with recent completion of my amp. My mains voltage is constant at 124v-125v. So I biased it based on this. Now that I've been checking all the voltages and see what different mains voltage will do to the overall measurements, it makes me want to get a regulator even more.

Like Todd has mentioned I know I have had my other amp feel different from place to place. Although I'm usually more concerned and dealing with dirty AC, which is something else most of regulator/conditioners will help.

I would think that while the voltage difference that the individual components see when the mains is not ideal, it would be the difference in bias that would produce the biggest effect of tone and feel.
« Last Edit: March 23, 2011, 06:34:30 PM by SoundPerf » Logged

Chris

Ceriatone HRM 50
w/self built Dumblelator
Avatar 2X12 w/WGS ET-65 & Veteran 30
TC Electronic 2290
2001 PRS McCarty
2010 PRS 513 Swamp Ash
Tacoma JK50C
Seagull S12+
ampkits
Administrator
Sr. Member
*****
Offline Offline

Posts: 325


View Profile
« Reply #4 on: March 26, 2011, 08:15:36 PM »

Hi

This is why we still use 240V for all the amps for EU. The variance just makes it a bit risky to set for 220 or 230V even.

On the other hand, that device mentioned, I am indeed thinking to release something like that.

But, better still, it;d be adjustable. So if you see today your wall is 230V, you can adjust accordingly (the device will have reading of your wall input).

It will not be automatic, as that entails circuitry that'd probably like switching power supply (problems).

The device is totally passive, nothing fancy. Ie, it's a big transformer with multiple taps to adjust to whatever the wall is, so that the transformer receives what it wants to see ideally.

Perhaps, same transformer can be wound there, and you dont have to spend EU300 for it?

and, with this thing, you can carry it anywhere (albeit heavy), so that your amp performs optimally at the gigs too.

My 240V,

Thanks!

Nik
Logged
SoundPerf
Sr. Member
****
Offline Offline

Gender: Male
Posts: 392



View Profile
« Reply #5 on: March 27, 2011, 01:32:23 AM »

Sounds like a good idea, Nik.
Logged

Chris

Ceriatone HRM 50
w/self built Dumblelator
Avatar 2X12 w/WGS ET-65 & Veteran 30
TC Electronic 2290
2001 PRS McCarty
2010 PRS 513 Swamp Ash
Tacoma JK50C
Seagull S12+
plasticvonaband
Hero Member
*****
Offline Offline

Gender: Male
Posts: 747


Pickin and Grinnin since 1989


View Profile WWW
« Reply #6 on: April 01, 2011, 09:11:21 PM »

Nik to the rescue!!!
Logged

Overdrive is like peanut butter. Some like it crunchy, some like it creamy.
Bluesmaster 50 2x12 combo and some guitars.
Bluesbreaker68
Newbie
*
Offline Offline

Posts: 2


View Profile
« Reply #7 on: May 18, 2022, 06:00:21 AM »

Furman Voltage regulator are available in 230/240V AC but they are no good for tube amps. They won't harm them but they can't keep the voltage within +/- 2 VAC of the specified 230/240V. They have a +/- 10% so that means if the voltage is within the range of 240V you will still get a varying voltage until the voltage either exceeds 240V by 10V or drops 10V below.  Obviously 240 is not what you are going to get from your socket all the time. I find with tube amps especially if the internal/plate DC voltages are high. My custom buily Barwatt "Super P.A"100W 1968 circuit amp runs at an internal 475 VAC. Even small fluctuations in AC voltage, I'm talking 2 VAC, you can here the difference. The builder set the tubes bias with a outlet voltage of 240VAC. If the voltage is running high, say 245 V the amp sounds brighter, harsher and not so good.

When the voltage drops below 240V to around 238V it sounds excellent, further drop in voltage to around 232 V it again starts to sound bad.

Bands/Musicians like AC/DC and Joe Bonamassa and many more use Kikusui (Japan) voltage regulators. They are quite expensive but they can be used anywhere in the world, you can set the voltage to just about any voltage you desire and it will keep it within +/- 2 VAC of your desired setting( on the 200V setting) and +/- 1 V on the 100V setting. They can store  up to 4 voltage programmes and you can select between 50/60hZ. There is a whole range. I think the smallest  is 500 KVA which I think is enough to power a 100W tube amp.

AC/DC (Angus Young) uses the largest which can power up to 12 x 100W amp heads. His amp tech swears by them. They are essential to maintain a consistent tone worldwide.

There is a Youtube video, a rig rundown either of AC/DC or Angus Young's gear.

I am going to get one when I can afford it as I am getting so frustrated by inconsistent tone from my amps.

I'm in Australia and we have a nominal voltage of 240V at 50 hZ.  I have a plug in voltmeter and it shows that the voltage here is constantly varying. The highest I've seen is 250.8 VAC and the lowest 231 VAV.

I don't bother playing if the meter reads over 245V as the amp just doesn't sound great.  You can actually hear the change in tone when you are playing when the voltage changes by just a few volts.

Furmans' will protect your gear and correct the voltage if it is 10 V either side of 230/240V. I had one and I'm not really sure it did anything to keep the tone consistent. They can be set to 230 or 240V AC.
Logged
Bluesbreaker68
Newbie
*
Offline Offline

Posts: 2


View Profile
« Reply #8 on: May 19, 2022, 03:13:30 AM »

Here's a link to AC/DC Guitar/Amp tech discussing the Kikusui Power Supply it starts at around: 9.26 into the video. Pretty brief but relevant!

https://youtu.be/j5C7GKGxICg
Logged
vikas2kumar
Newbie
*
Offline Offline

Posts: 2


View Profile
« Reply #9 on: May 30, 2022, 11:32:23 AM »

Hi, everyone, This is MobileRepare that provides online mobile repair service at your doorstep in the Delhi-NCR location. At Our mobile repair service store , you can book the mobile repair service to get benfits of our doorstep mobile repair service  within a call. You also can visit the site. Our mobile repair technicians will get back to you shortly.It is one of the best online mobile repair service providers in Delhi. Don't think twice, contact us now. 
Logged
vikas2kumar
Newbie
*
Offline Offline

Posts: 2


View Profile
« Reply #10 on: May 30, 2022, 11:38:48 AM »

Hey guys , are you looking for the best digital marketing company in delhi for your business online promotion , so you are correct place , here your all worries about online business promotion got end. we are syscorpinc. come and join us.
Logged
slinde
Newbie
*
Offline Offline

Posts: 1


View Profile
« Reply #11 on: September 20, 2023, 12:03:32 PM »

The issue of mains voltage and its potential impact on audio equipment like amps is an interesting one. While the EU did aim for voltage harmonization, it's true that there's still some variability across different regions and even within the same region due to factors like demand fluctuations.

Changing your house voltage to 220V using a product like the one you mentioned could potentially have some effects on the performance of amps from other countries and UK-made amps. Lower voltage might slightly reduce the output power and affect the tone, potentially making it sound slightly different. However, whether this change is noticeable or preferred is subjective and depends on your personal taste.

Consistency in voltage throughout the day can be an advantage for sensitive equipment, but om production's modern amplifiers often have built-in voltage regulation to handle minor fluctuations.

Ultimately, the decision to invest in a product like the one you mentioned should be based on your specific needs and preferences, and it might be worth experimenting to see how it affects your equipment and your perception of tone.
Logged
slpouny
Newbie
*
Offline Offline

Posts: 1


View Profile
« Reply #12 on: September 22, 2023, 05:09:42 PM »

Thanks for sharing! Your input, whether it's information, a personal story, or something else, is greatly appreciated. Sharing is a wonderful way to foster communication and learning within our community, and it's always a pleasure to see the valuable contributions of our members. Keep it up!
usaudiovisuals
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.