Ceriatone Forum

Muchless => DC 30 => Topic started by: henkebarn on September 04, 2011, 11:05:35 AM



Title: Will I need a C-lator/kleinulator for the effects loop?
Post by: henkebarn on September 04, 2011, 11:05:35 AM
I'm going to buy a TC G-Major for my metal rig, but want to use it with my DC30 too. How about the loop? Is a X-lator needed?


Title: Re: Will I need a C-lator/kleinulator for the effects loop?
Post by: wyatt on September 04, 2011, 02:42:51 PM
Someone who actually has a G-Major might post.

Typically...yes.

It all has to do with the effects input and output impedance, how it handles the signal strength coming form the amp and how the amp handles the signal strength from the G-Major.

All the "interrupt FX loop" does is allow you is insert devices in series between the preamp the phase inverter in an amp that was not designed or tuned for such a purpose. 


Title: Re: Will I need a C-lator/kleinulator for the effects loop?
Post by: henkebarn on September 04, 2011, 03:05:42 PM
Alright! Thanks for the reply.

Would you redcommend the kleinulator och c-lator for the dc 30?
I love that the c-lator is in rack form, but which ones best for the tone?


Title: Re: Will I need a C-lator/kleinulator for the effects loop?
Post by: wyatt on September 05, 2011, 04:27:44 AM
Alright! Thanks for the reply.

Would you redcommend the kleinulator och c-lator for the dc 30?
I love that the c-lator is in rack form, but which ones best for the tone?

Not familiar enough with either to give advice.  But, in theory, the best buffer,won't have a tone but be transparent, they aren't gain stages or a tone stack or a boost, they are just there to make everything simpatico between the amp and effects.