|
Title: No output from power amp section Post by: johnjgormley on March 30, 2010, 12:12:10 AM Just finished my DC30. Light comes on, Tubes glow. No sound. If I input a signal to the input jacks I get signal out going in to the power tubes (pin2). I have VERY high plate voltages on my power tubes. (pin 3 is 67 volts, pins 7 & 8 are about 870 Volts. I checked the windings in the output transformer. I've triple checked my wiring and cant find anything wrong. Suggestions???
Thanks John Title: Re: No output from power amp section Post by: johnjgormley on March 30, 2010, 03:13:53 AM Whoops. I was on AC volts. Switched to DC. Now voltages are within tolerance. Still no output.
Title: Re: No output from power amp section Post by: johnjgormley on March 31, 2010, 12:37:10 AM Got it. Forgot that little jumper across the middle pair of contacts on the Hi/Low power switch. Duh!
|