|
Title: New DC 30 kit on the way Post by: telemad on May 09, 2009, 04:11:23 AM Got kit # 2 with blank boards. I have a boatload of SoZo and F&T caps to use.. Any sticky points in this build to beware of??? I am very excited this will ne my second build the first was the 5e7 which is a sweet amp... well I will be checking back with some questions I'm sure....
Title: Re: New DC 30 kit on the way Post by: Franc on June 10, 2009, 12:36:18 PM What value resistors will you be using for the 6 way TONE stack of the EF86 channel?
I was wondering because the layout read 5M1 resistors, but the kit I just received has 4M1 resistors. Title: Re: New DC 30 kit on the way Post by: telemad on June 10, 2009, 03:39:13 PM What value resistors will you be using for the 6 way TONE stack of the EF86 channel? I was wondering because the layout read 5M1 resistors, but the kit I just received has 4M1 resistors. I populated my own boards. I used 4m7 there. I was unable to find 5m1 the vendors were either out , backordered or they were special order. I sent nik an e-mail and one to ampgarage and both said the 4m7 are fine in those positions. I would bet the 4m1 will be also. Send nik an e-mail or ask the question on the ampgarage forum... You can see pics of my build on this page. I just finished wiring and await my tubes and then can perform the start-up.... Here's to good building............ |