Welcome, Guest. Please login or register.
Did you miss your activation email?
November 23, 2024, 07:26:54 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Muchless
| |-+  DC 30
| | |-+  HF squeal around 12kHz in DC30		 « previous next »
Pages: [1] Go Down Print
Author Topic: HF squeal around 12kHz in DC30  (Read 4818 times)
Crusty_old_rocker
Newbie
*
Offline Offline

Posts: 20


View Profile
« on: April 05, 2010, 10:03:42 AM »
I just tested my DC30.  Checked everything and all appears fine except for a high pitched squeal at around 12-13kHz that kicks in at around 30% volume on both the 12AX7 and EF86 channels when the master volume is >50% or bypassed.

Although it's hard to tell at the frequency, it sounds like a sine wave and the frequency shifts slightly when the volume level is changed.

Given the nature of this squeal appearing within the preamp stage and the fact that it comes in when increasing the volume on either preamp channel when the master volume is up suggests to me that this is some HF feedback.

Could anyone provide some suggestions on how to track this down and eliminate it?

I'd appreciate any suggestions.

Cheers,

Crusty
Logged
Crusty_old_rocker
Newbie
*
Offline Offline

Posts: 20


View Profile
« Reply #1 on: April 06, 2010, 09:42:14 AM »
Okay, checked tubes by swapping out.  No change.

Did some more trouble shooting and found that the squeal disappears when the cut control is maxed to knock out the higher frequencies.

Explored the wiring from the cut control and tone stack to the EL84s and noticed that moving the wires altered the frequency of the squeal.

Further investigation revealed that the squeal is definitely related to the current going IN to the output transformer.  Moving the wires for the output tranny makes all sorts of horrible squealing noises.

Is this a defective output tranny?

Cheers,

Crusty
Logged
Crusty_old_rocker
Newbie
*
Offline Offline

Posts: 20


View Profile
« Reply #2 on: April 06, 2010, 11:51:41 AM »
Contacted Nik and he suggested building a separate shield fot the OT. So I made a mock up and installed it and it removed the squeal.

Nik really is great with his help.

Cheers,

Crusty
Logged
alwalt
Jr. Member
**
Offline Offline

Posts: 95


View Profile
« Reply #3 on: April 19, 2010, 10:55:34 PM »
wow! it's cool to hear the noise it's gone! No surprise Nik lead you right to the very problem and fix.
Good to hear that Crusty!
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.