Welcome, Guest. Please login or register.
August 19, 2022, 04:05:59 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
Guests please register
Note: If you want to help you can donate to keep the forums alive.

Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Muchless
| |-+  DC 30
| | |-+  DC 30 in for repair
« previous next »
Pages: [1] Go Down Print
Author Topic: DC 30 in for repair  (Read 2677 times)
Offline Offline

Posts: 1

View Profile
« on: July 28, 2016, 08:32:54 PM »

I have a Ceriatone DC 30 in that was brought to me after it failed during a stage break. At first inspection I noticed the rectifiers were lit and the V8 power tube closest to the rec tubes glowing like a Christmas tree. None of the other power or preamp tubes, which have been substituted, even show filament light even though all tubes have both ac and dc reading within the parameters. Tested the OT and it's fine. Can't get passed the lack of glow when filament voltage is present. Haven't tested the cathode to fixed bias switch but every test point checks out. The build is good except for a little sloppy filament wiring and the fact that there were two GZ34's in place instead of one or two 5V4's.

Any direction would be greatly appreciated.

Regards, Moejoe
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.