Welcome, Guest. Please login or register.
Did you miss your activation email?
November 24, 2024, 02:43:48 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Muchless
| |-+  DC 30
| | |-+  ABY switch for DC 30, what about the "Y"?		 « previous next »
Pages: [1] Go Down Print
Author Topic: ABY switch for DC 30, what about the "Y"?  (Read 9973 times)
Ivan Durak
Newbie
*
Offline Offline

Posts: 7


View Profile
« on: February 25, 2013, 02:33:58 PM »
Hi everybody.

I was wondering if it's possible to run both channels at the same time with a standard ABY switch. What does it sound like? Is the split signal too weak? Would it need an EP boost?
Logged
wyatt
Guest
« Reply #1 on: February 25, 2013, 04:01:52 PM »
The signal will be a little lower, but nothing that their gain stages shouldn't make up.

You may have a ground loop or phase issue, so you might consider an ABY with a ground lift and phase switch.
Logged
Ivan Durak
Newbie
*
Offline Offline

Posts: 7


View Profile
« Reply #2 on: February 26, 2013, 03:43:10 PM »
Thank you Wyatt. I'm looking into different ABY switches.
Logged
Ivan Durak
Newbie
*
Offline Offline

Posts: 7


View Profile
« Reply #3 on: March 18, 2013, 01:20:08 PM »
Thanks a lot for these pointers, bcmatt.
Logged
elliptic
Newbie
*
Offline Offline

Posts: 6


View Profile
« Reply #4 on: January 20, 2014, 09:28:54 PM »
You can do it by just running a patch cable from the second input of the channel you're plugged into into the top input of the ther channel.  It does change the sound slightly, but I'm not sure whether that's due to the load on the cable changing or having both channels running at the same time.

I'm looking for a buffered ab/y that lets you adjust the relative gain of each.
Logged
Ash Telecaster
Newbie
*
Offline Offline

Posts: 4


View Profile
« Reply #5 on: July 15, 2016, 07:03:35 PM »
Hi,

I see this is an old thread but I was just thinking about doing the same thing. I was intending on A/B-ing the channels but then thought about blending them. Has anybody tried this? How were the results?

Thanks!
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.