Ceriatone Forum

Brand New Dumble style Head Cabs for Ceriatone Overtone Special and HRM

Price is $165.00 plus shipping.
Shipping is $25.00 in the Continental USA.
Limited quantities.

Brown Vinyl with Wheat Grille Cloth. Short cab (10 1/4" H.)

Height dimensions include feet

I can switch the grille cloth panels on the tall cabs, so if you want
a different combination, let me know and I will try to accommodate.

Brown Vinyl/Wheat Grille Cloth. Tall cab (11 3/4" H)
 
Blonde Vinyl/Oxblood grille cloth Tall cab (11 3/4" H)


Made from high quality 13 ply Baltic birch. 3/4"

T-nuts and bolts used to install back panel.

Deluxe handle

Extra tall feet

Shielding tape installed

Inside of cab is painted black

Wood side rails included for ease of Chassis installation.

Pre-drilled mounting holes. (8 holes drilled)

These cabs are ready to ship - No waiting.

Shipping:
USA -  Fed Ex
Canada - U.S. Postal Service
Shipping box is 24"X17"X15" and weighs 23 pounds.
Ships from USA zip code 90608
 

Thanks,
Henry
(http://i87.photobucket.com/albums/k129/elevenguitars/Ceriatone%20Cabs/Brown%20Short%20cab/b5cd0755.jpg)
(http://i87.photobucket.com/albums/k129/elevenguitars/Ceriatone%20Cabs/Brown%20Short%20cab/deecf6ed.jpg)
(http://i87.photobucket.com/albums/k129/elevenguitars/Ceriatone%20Cabs/Brown%20Tall%20Cab/99ec9aa9.jpg)
(http://i87.photobucket.com/albums/k129/elevenguitars/Ceriatone%20Cabs/Brown%20Tall%20Cab/33b435e0.jpg)
(http://i87.photobucket.com/albums/k129/elevenguitars/Ceriatone%20Cabs/Blonde/02acb556.jpg)
(http://i87.photobucket.com/albums/k129/elevenguitars/Ceriatone%20Cabs/Blonde/6eda9a95.jpg)

Just wanted to chime in and say, I've purchased (2) tall head cabs and (2) 2x12 dumble style speaker cabs from Henry ( Tenguitars ) and they are of the highest quality.
Here is a pic of the cabs taken before receiving my last 2x12 which matches the darker head cab ( Marshall Green ) with Matchless style grill cloth.
I have since changed the red knobs to green btw ;)

Todd

Reply sent to email address.

Thank you,
Henry

Are there any left??? :(

Let me know what you need. There are more available.

Thanks,
Henry

is there plenty of room for a c-lator in the tall cabs?

Also would you be able to be persuaded to make a cab for a Stray Cat?

Gregg

Both OTS cabs are tall cabs I purchased from Henry ( Tenguitars ).
On the top cab I modified the grill to accommodate my C-lator using scissors and jigsaw. As is I have to remove C-lator to change my output tubes but for me that is not a problem since I do not change them often. Ideally if the grill was made with C-lator cutout at very bottom, rather than sitting above the bottom cross bar you could change tubes without removing the C-lator


Todd

Hi Greg,

I wanted to thank Todd for answering your question on the C-lator and Tall cab.
I'm finally looking at a solution tomorrow and will have more information, if it looks good.


As for the Stray cat and Dizzy cabs, they can be done. The more people interested the better. A larger run of cabs will keep the price down.
Are you looking for a head or combo?

Thanks,
Henry

Henry,

Any update on the c-lator solution?

as far as the stray cat goes, when i go for it, which will prolly be next year sometime, i was thinking about a head for it.

Thanks!

Gregg

Just thought I would post that I just got an HRM cab from Henry and am blown away.  You could not have a better built cab, he nailed it.  I had him clone a Glaswerks cab I saw which had black levant and kind of a wicker grill and it looks awesome.  Not a flaw on the whole cab I highly recommend his work. 

I too have dealt with Henry on a OTS FM 100 (he put in the trannies and choke, and built the head cab) and a matching 2x12 cabinet and could not be happier with both the tone and the looks of his work.  Best of all, he kept me in the loop, made some wise suggestions for some switchable, low cost mods that expand my tonal options a bit, and patiently answered all my questions.  It's always a bit nerve wracking to deal with someone across the country (USA) that you don't know when there's well in excess of 4 figures involved, but I wouldn't hesitate to work with Henry again. 

Now, to get this baby out to some gigs!  :chairdance:

Henry,

I too would be interested in a head cabinet design for a C-lator too.  Something like the cabinet Nik shows on his site.

Will you offer this option?

thanks

I would like to order a black w/black grille tall cab. How much for shipping?

This was originally my idea.  srsly

Here's the Head cab I received form Henry almost a year ago.

Henry, do you ship to the UK and how much would it cost?

Which head cab would be the same style as a Two Rock Custom Reverb? I'm thinking the Tall Cab from looking at the photos...

Thanks

AJ

Still after a head shell Adrian? I've still got my head shell that you were interested in a couple of years back.I seem to recall you weren't keen on the grille cloth ;D In two minds about selling especially as Nik has restarted selling kits, I might have to get another one!!

I'm in the process of building some oversize 2x12 cabs like this one under the Z. Interested? I have an order for one, another tentative and I'm building 3 altogether. 18mm birch ply, dovetailed joints, 15mm birch baffle, oval rear port.

Henry,

Any of the OTS Tall Head Cabs with the C-Lator cut out available yet?

Gregg

Maybe...I never actually got my OTS way back when....various things got in the way to the point that I was even without a guitar for a while, am finally back to the point of getting myself a gig-rig back together though...

...currently working out what will cost what, so if you would be so kind as to PM me with what sort of price you'd be looking at for the head cab and matching 2x12" that would be great. I may not have particularly liked the grill cloth back then, but looking at it now I actually really like it - especially with the matching cab...

If you were custom building them, what would be the chances of also getting a unit to sit between the head and speaker cabs that would house 2 rack units (C-lator + 1U sized reverb unit)?

All Head cabs are on sale for $145.00 plus shipping.
Limited to quantity on hand.
I'll be posting more photos.

Thanks,
Henry

Henry how much to ship one to Australia?

PM your information. City/Postal Code and I will check for you.

I have a couple of Black CARBON FIBER vinyl tall cabs that have been added to the first page.

I can also switch the grille cloth panels if someone wants a different combination.
Let me know what you need and I will try to accommodate.

Henry,

Would it be possible to make a tall head cab that is slightly taller, say 14 inches or so? My goal is to put a c-lator and a fur man power conditioner in the head cab for an all in one grab and go solution.


Thanks

Gregg

Hi Gregg,

Is the Furman about 7.5" deep?
How tall is the output transformer and power tubes?

Right now, a run of combo cabs is being done.
On Monday, I can use my chassis and do a mockup.
I have a couple of old rack mount units I can use to see how things fit.

Thanks,
Henry

Henry,
I need a cab with the C-lator mod. Black with the white piping. Is that available at this time. Please send me a PM with ordering info etc.
Thanks,
Brian Paul
Brian Paul Guitars
www.brianpaulguitars.com

Henry,

Tried sending a PM regarding your cabs, but I'm not sure if it went through.

Henry,

Any Tall Blonde Cabs with an Oxblood grills left?

Gregg

Hi Gregg,

I have a Tall Blonde cab in Oxblood or Wheat grill.
Also have Brown in Tall and Short

Thanks,
Henry

Thanks for the reply, Henry.

Any chance of getting a tall one built with that light faux tweed  tolex (not actual tweed fabric) and an oxblood grill?

Gregg

Gregg,
Won't be able to offer that until a new run of head cabs is done.

I can offer you the tweed vinyl and oxblood with stripes or solid oxblood in a 1X12 combo cab.

Thanks,
Henry

Cool.  I will let you know soon!

Thanks, Henry.
Gregg

Can I buy the tall blond oxblood for ots?

Hey there!

Would like to snag a 1x12 cab for my ceriatone bluesmaster black (two rock colors).

Here's my email, thanks

samuel.berce@maine.edu

hey henry i would like to order a 2x12 cab the brian bigdaddy7115@comcast.net

I need another head cab for a OTS can you help?

Mark E Duke

Hi Mark,

Yes. I sent you an email.

Thanks,
Henry

Hello. Do you have a head cabinet available or could you make me one? I need one for a 183 100 watt kit I just got. Thanks.

Email is parkecj@hotmail.com

I need a cab. Please email me. hollisferris@gmail.com

I am extremely happy that I got one of Henry's cabs. They're perfect.

Any new cab runs Henry?

Any new run of cabs, Henry?

Gregg

Hey Henry,

Are you still making these D-Style short head cabs for OTS and HRM?
If so, let me know, I'm looking to get one with black on black?

Cheers,
Ken.

Ca you build one for the 2202, shortcab with amp bottom-mounted?

HI Henry

I have a Ceriatone OTS FM Modern Eagle - Would that chassis fit in your custom made heads? I would be interested in that Blonde with oxblood grill