Welcome, Guest. Please login or register.
Did you miss your activation email?
December 03, 2024, 05:43:53 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  American Style
| |-+  BF Champ, Vibro Champ
| | |-+  Construction Images and/or notes/tips for Ceriatone Ultra Champ
« previous next »
Pages: [1] Go Down Print
Author Topic: Construction Images and/or notes/tips for Ceriatone Ultra Champ  (Read 8615 times)
mmurray
Newbie
*
Offline Offline

Posts: 2


View Profile
« on: October 26, 2011, 06:47:09 AM »

I'm getting ready to start building the Ceriatone Ultra Champ and wondered if anyone had any images and/or construction notes/tips that they would be willing to share.

Michael
Logged
T Wilcox
Sr. Member
****
Offline Offline

Gender: Male
Posts: 399



View Profile
« Reply #1 on: October 26, 2011, 07:39:41 PM »

Hey Michael

There should be images on the Ceriatone website to use as a guide for lead dress.
I'm not sure if this is your first build but here are a few tips:

1. Grind down to bare metal on the chassis at the grounds with a dremmel or sand paper before mounting tabs. ( the painted chassis is non-conductive )

2. Use a good soldering iron, not a $15 radioshack deal

3. Best tool for ampbuilding I have found so far is a small pair of 45 degree angled needlenose pliers. ( makes lead dress 10 times easier )

4. pre tin your wire after stripping. ( makes step 5. come out more professional looking without frayed wire ends )

5. Make a solid mechanical connection before soldering, by bending stripped wire end into a hook/loop and routing through terminal then crimping tight. ( you should not have to hold wire in place while soldering ).

6. I use loctite blue thread locker on all nuts and screws so they will never come loose from vibration.

7. With every step throughout the build ask yourself " will this last 30-40 years without needing to be repaired? "

8. If there is anything you are unsure of ask here and you will usually get a fairly quick response!

Todd
Logged

Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550  ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat
mmurray
Newbie
*
Offline Offline

Posts: 2


View Profile
« Reply #2 on: October 27, 2011, 03:57:52 AM »

Hi Todd, thank you for taking the time ro reply.  I have some limited previous experience and your guidance will be a big help.

Warmest regards
Michael
Logged
T Wilcox
Sr. Member
****
Offline Offline

Gender: Male
Posts: 399



View Profile
« Reply #3 on: October 28, 2011, 01:03:01 PM »

No problem
Let us know if you have any questions

Todd
Logged

Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550  ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat
kingster
Newbie
*
Offline Offline

Posts: 2


View Profile
« Reply #4 on: March 12, 2015, 01:13:16 AM »

I would add using a handheld magnifying glass. radio Shack sells one for cheap.  I check every solder joint, and would have missed a few cold solder joints without it.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.