Welcome, Guest. Please login or register.
Did you miss your activation email?
October 08, 2024, 06:17:21 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  American Style
| |-+  5F6-A Bassman
| | |-+  BAssman Bias
« previous next »
Pages: [1] Go Down Print
Author Topic: BAssman Bias  (Read 8529 times)
mutron80
Newbie
*
Offline Offline

Posts: 1


View Profile
« on: January 14, 2009, 09:25:22 AM »

Hi,
I need de cathode current to adjust the bias.

Thanks and sorry for  my english.
Logged
wyatt
Guest
« Reply #1 on: January 14, 2009, 11:39:23 AM »

If you haven't already done so, you measure the Plate Voltage coming off pin 8 of the rectifier.  Careful doing so, it's high voltage. 

Then you measure the voltage from Pin 8 of each power tube socket to Ground (red probe on pin 8 of the socket, black probe on a chassis ground), this will be in milliVolts.   1mV=1mA of cathode current thanks to the 1-ohm resistor running from pin 8 of the power tube sockets to ground.

At the top of this page, select your power tube style and enter your plate voltage. 
http://www.webervst.com/tubes1/calcbias.htm

It will tell you what the cathode current should be for ~70% dissipation.  Adjust the bias pot and keep checking cathode current until you get the tubes in the ballpark.
« Last Edit: January 14, 2009, 11:41:00 AM by wyatt » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.