Welcome, Guest. Please login or register.
March 25, 2023, 07:20:42 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.










Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  American Style
| |-+  5F6-A Bassman
| | |-+  BAssman Bias
« previous next »
Pages: [1] Go Down Print
Author Topic: BAssman Bias  (Read 5257 times)
mutron80
Newbie
*
Offline Offline

Posts: 1


View Profile
« on: January 14, 2009, 04:25:22 AM »

Hi,
I need de cathode current to adjust the bias.

Thanks and sorry for  my english.
Logged
wyatt
Guest
« Reply #1 on: January 14, 2009, 06:39:23 AM »

If you haven't already done so, you measure the Plate Voltage coming off pin 8 of the rectifier.  Careful doing so, it's high voltage. 

Then you measure the voltage from Pin 8 of each power tube socket to Ground (red probe on pin 8 of the socket, black probe on a chassis ground), this will be in milliVolts.   1mV=1mA of cathode current thanks to the 1-ohm resistor running from pin 8 of the power tube sockets to ground.

At the top of this page, select your power tube style and enter your plate voltage. 
http://www.webervst.com/tubes1/calcbias.htm

It will tell you what the cathode current should be for ~70% dissipation.  Adjust the bias pot and keep checking cathode current until you get the tubes in the ballpark.
« Last Edit: January 14, 2009, 06:41:00 AM by wyatt » Logged
dfdre44
Newbie
*
Offline Offline

Posts: 9


View Profile
« Reply #2 on: March 16, 2023, 09:38:34 PM »

A contractor ought to be capable of exhibit that they have got the abilities, knowledge and revel in general contractors Vancouver, where an corporation, the organisational capability to carry out the work safely and with out threat to fitness.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.