Welcome, Guest. Please login or register.
Did you miss your activation email?
November 21, 2024, 01:37:27 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  American Style
| |-+  5E7 BandMaster
| | |-+  5E7 3x10		 « previous next »
Pages: [1] Go Down Print
Author Topic: 5E7 3x10  (Read 35201 times)
Boogie92801
Newbie
*
Offline Offline

Posts: 2


View Profile
« on: March 18, 2008, 04:10:26 PM »
Hello,

I have played a few other Ceriatone amps but none of hte tweed ones.

Can anyone chime in on this model? 

I really want to build one.
Logged
Len
Newbie
*
Offline Offline

Gender: Male
Posts: 9



View Profile
« Reply #1 on: March 25, 2008, 09:42:19 PM »
I have one, completely assembeled by Ceriatone. The cabinet will show up tomorrow , then I will put them together with 3x 10" Celestion from abt 1965.   So far the only problem has been that  Ceriatone did not connect the 4 Ohms tap from the OT, but the 8 - and 16 Ohm.
Nik said it was due to the fact that on the comboversion there was not room for a threeway selector.

3x8 Ohms speakers in parallell gives you a resistance that the amp "can see" of abt 2,67 Ohm. Therefore one need the 4 ohms tap connected.

Again, since the original Fender from 1955 had 3x 8 Ohms speakes connected in parallell, one would want that. At least I do.
 
I have made the modification so that I have only connected 4 Ohms and 8 Ohms. Easily done, but in a country like sweden I had to pay som 160 USD( ! ) to have it done (Yes Sweden is a expensive country), since I am not able to do it myself. That was a waist of money for me. Never the less, I have discussed the matter with Nik , and I sincerely hope that it will be correct on future complete comboamps.

Another small detail - one have to add a tiny little angeled bracket on the big tranny, to help carry the weight when assembeled to the cabinet.


I have found some old pictures on an original 1955 unit that I have as a rawmodel.

I have tested to play it as it is , and it sounds promising , thats for sure.

I will add som more pictures when the cabinet has arrived.....

All the best

// Len

Could anyone explain how to insert a picture ?
« Last Edit: March 25, 2008, 10:05:44 PM by Len » Logged
Len
Newbie
*
Offline Offline

Gender: Male
Posts: 9



View Profile
« Reply #2 on: April 16, 2008, 06:31:26 PM »
Well,

Here it is , my new Bandmaster. It is a fantastic amp to play , even att full power. It is quiet and hav a amazingly good, vintage sound.
It is , of course, equipped with 3x Jensen Alnico P10R.  The sign on the fron I have designed and made  myself.
Of course I did not want a Fender sign , since it unfortunately not is a Fender. Therefor I had a sign made  where it says - " Bandmaster by Ceriatone".

I am very happy about my new amp, and my band really loves it after only one session !

Here are a few pictures :






Yes I even put a small sign with the tubeconfiguration and "Made By Ceriatone " on the inside on Fender maner.





That´s my beauty, how about her ??


All the best

Len
« Last Edit: April 19, 2008, 09:11:25 AM by Len » Logged
cmoore
Sr. Member
****
Offline Offline

Gender: Male
Posts: 351


View Profile
« Reply #3 on: April 16, 2008, 06:54:49 PM »
Wow!!!
Looks like somebody did a nice job with the Tweed. And a real Pine cabinet also. What brand power tubes are those?
Logged
Len
Newbie
*
Offline Offline

Gender: Male
Posts: 9



View Profile
« Reply #4 on: April 17, 2008, 11:28:01 AM »
Quote from: hired hand on April 16, 2008, 06:54:49 PM
Wow!!!
Looks like somebody did a nice job with the Tweed. And a real Pine cabinet also. What brand power tubes are those?

Thank you !!
The intention was to build a "historical correct"  Bandmastercloone as far as possible. That called for Pinecabinet, Jensen P10R, laccquered tweed .
I intended to use three old Celestione 30 w 10" speakers, but it turned out that the magnet on them was too Wide. Therefore I had to go for the Jensen P10R. like the original had. And as one can see on one of the pics , there is not much room between the ampchassie and the speakermagnet. Tongue

The power tubes are Tungsol, that came with the amp. And they are good ! In general I have the impression that the tubes and the components are very good quality from NIK. I have compared with a kit from Weber, also 5E7, and mine is by far better sounding !

All the best
// Len
Logged
Roe
Full Member
***
Offline Offline

Posts: 101


View Profile
« Reply #5 on: April 20, 2008, 09:54:41 AM »
did ceriatone sell the cab?
Logged
Len
Newbie
*
Offline Offline

Gender: Male
Posts: 9



View Profile
« Reply #6 on: April 22, 2008, 04:12:51 PM »
Quote from: Roe on April 20, 2008, 09:54:41 AM
did ceriatone sell the cab?

No they did not.
This was done , not by me unfortunately, by the Tubeamp Doctor (TAD) in Germany, and bought from them.

A friend of mine , with very little assistance from me, started to make our own cab, but halfway through the project we realized that we did not have the correct drawings/measurement to build from. At that time, the amp had arrived from Malaysia, so the solution was to buy a cabinet. I found TAD being  the best available supplier for me. I am sure there are others , but this is what I found and I´m happy for it.

Now I have the most awesome Bandmaster by Ceriatone ! Chair Dance

It performs beatifully and I run it with a T.C.Electronics Nova system  hooked up between the guitar and the amp.

That gives me all the sounds needed , and what sounds !!

// Len
Logged
niCko
Newbie
*
Offline Offline

Posts: 1


View Profile
« Reply #7 on: May 12, 2008, 06:41:32 PM »
Please post soundclips! That looks real nice. I've been interested in the 5e7,5f4 5e5 amps for some time. Or maybe mention when you play in skåne...
Logged
AdrianJ
Full Member
***
Offline Offline

Gender: Male
Posts: 207



View Profile WWW
« Reply #8 on: May 19, 2008, 03:21:29 PM »
Quote from: niCko on May 12, 2008, 06:41:32 PM
Please post soundclips! That looks real nice. I've been interested in the 5e7,5f4 5e5 amps for some time. Or maybe mention when you play in skåne...

+1 on request for sound clips...
Logged
White Rose Guitars
telemad
Newbie
*
Offline Offline

Posts: 35



View Profile
« Reply #9 on: July 12, 2008, 04:02:05 PM »
I built one and can say it is without a doubt a very special amp. I got the chassis from NIK and used his schem and sourced everything else from various sources. I used F&T electrolytics... TS ri 5881's ... and Mullard ax7's ....VERY SWEET.......

* 100_0796_edited.jpg (100.02 KB, 582x685 - viewed 1378 times.)

* 100_0662.jpg (100.42 KB, 902x677 - viewed 1260 times.)

* 100_0707_edited.jpg (91.6 KB, 851x368 - viewed 1309 times.)
« Last Edit: July 12, 2008, 05:14:13 PM by telemad » Logged
brent
Newbie
*
Offline Offline

Posts: 6


View Profile
« Reply #10 on: November 26, 2010, 02:08:33 PM »
Can't see the pictures but I know this circuit!!!   Sounds amazing.  The originals had 3 Jensen P10R speakers connected in a series (not parallel).
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.