|
Title: need some help Post by: mriker on March 15, 2010, 03:26:29 PM in the fx loop layout which is the first b+ filter cap. is it the can cap? i am new to tube amp building but i think i can follow the layout well . i used to work as an electrician so i am aware of the high voltage dangers.
Title: Re: need some help Post by: cmoore on March 15, 2010, 10:08:34 PM Which one of Nik's 18 Watt layouts shows a FX Loop.?
Title: Re: need some help Post by: wyatt on March 16, 2010, 01:02:32 AM Well, this is the straight interrupt FX loop layout, but is pretty generic...
(http://www.ceriatone.com/images/mods/FX-Loop.jpg) What does has to do with the filter cap, I haven't a clue? To the OP, why do you need to know? But yes..."A" on this layout leads the first filter cap (32uF), half of the can. (http://www.ceriatone.com/images/layoutPic/marshallLayout/18Wceriatone.jpg) Title: Re: need some help Post by: mriker on March 16, 2010, 08:12:06 PM the transformer im using has 305vac secondaries and i was told i had to put some zeners in the b+ after the first filter cap. I referenced the fx loop layout because that is what i intend to build it can be found here http://www.ceriatone.com/images/mods/TMBceriatoneEffect-Loop.jpg
|