Hi guys, i just finished populating the board, and assembled the chassis.Now my kit included 3 Rolls of 22AWG 600v, one roll of green 22awg 1000v , for ground

Shielded cable, i know what to do with, then 4 rolls of very thin wire, for audio connections, i assume, coming from pots, to switches?

Then, there is a smaller roll of red wire that also looks like 22awg, but its solid, copper.

Now the 2 GZ34 rectifier sockets look like they are jumped together, with yellow wire…would this be the thin wire? As the only yellow wire i have is the very thin stuff, or could you tell me what wire size i should use? Please