Ok, There is a long piece of striped solid wire that is fairly brittle, what exactly is it used for? It came with the Overtone kit, in the WIRE bag.

There several other wires listed, "Teflon large, Teflon small, ect.." are there specific uses for those as well?

And the twisted black and white wires going to the tubes, what is the purpose of the twist?

My build is going very slow, so much to do it's hard to figure where to start.
Mostly what I've done is install hardware, 2 or 3 solder joints, stuff like that.

Still got to order the tranny's and figure out a head cab.

Anyway, thanks in advance for any help you can give me.

I have a Crate V18 212 combo cab that I think would work with the 36watt combo chassis, if of course the numbers match a little.

I thought about ordering both the Head and Combo chassis but that's just too much for right now.

The control opening is 18"x2 1/4" , There's 7" of clearance behind the chassis, should be plenty forany Tranny hieght and the tubes would be hangin' of course.
Width of the entire cab is 27"

What are the specs of the 36watt chassis?

Thanks