Welcome, Guest. Please login or register.
January 18, 2018, 09:44:49 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.










Do you want to advertise on this forum ? Send me a private message.



 


Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Overtone Layout
« previous next »
Pages: 1 2 [3] Go Down Print
Author Topic: Overtone Layout  (Read 36509 times)
hywelg
Hero Member
*****
Offline Offline

Posts: 904


View Profile
« Reply #30 on: June 04, 2008, 03:58:05 PM »

The two trimmers on the main board get left alone? thanx 

The right hand trimmer on the main board is the one that controls the OD channel level and is the one you'll experiment with most. The PI trimmer (left hand end of main board) is set and forget The trimmer on the satellite board that contains the FET, controls the level for that input. Most owners don't use the FET input much but you might want to just set it to a sensible level and leave it, I have mine at 9 o'clock.

Also I noticed I was sent two black an one red bias ports. The drawing shows it in reverse. 

That won't matter, just use the  red one in the centre. They are just measuring points.

Is the star ground one of the PT bolts or seperate. Pic looks seperate.

Separate bolt with 3 or 4 solder tags. Don't tighten it up until all your joints are made. It works as a big heat sink if you do and a low power iron will struggle.

HTH

« Last Edit: June 05, 2008, 03:12:26 AM by hywelg » Logged
jerrydyer
Newbie
*
Offline Offline

Gender: Male
Posts: 24


View Profile WWW
« Reply #31 on: June 04, 2008, 04:38:03 PM »

hey thanx      I just havent seen a PI trimmer. hhhmmmnnn! interesting. 
Logged

jerrydyer
Newbie
*
Offline Offline

Gender: Male
Posts: 24


View Profile WWW
« Reply #32 on: June 09, 2008, 11:45:12 AM »

also are there supposed t obe plugs for the unused switches on the back? thanx
Logged

ampkits
Administrator
Sr. Member
*****
Offline Offline

Posts: 327


View Profile
« Reply #33 on: June 28, 2008, 06:05:43 PM »

Hi,

  Yes, screws are provided to cover the holes.

  I just dont see a point for 1/2 power switch on the overtone.

  Perhaps my ears are in their golden years (heh).

  We do install on request, however.

  Thanks!

Nik

also are there supposed t obe plugs for the unused switches on the back? thanx
Logged
RiffRaff
Jr. Member
**
Offline Offline

Posts: 50


View Profile
« Reply #34 on: October 28, 2009, 09:43:39 AM »

This is probably a dumb question....but that is the schematic, correct?
Is there a front panel layout anywhere that discusses the controls and what they do, as well as the internal trim controls?Huh?  (i guess something like a MANUAL)Huh?

Just wondering which layout is correct?
This one is a bit different than the one from the order page I've been using
Why is it different?
Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #35 on: October 28, 2009, 10:29:16 AM »

Read all the posts on this forum (and on ampgarage.com as well) like the rest of us have done over time and you will get all relevant information there is on the Dumble subject.

Also take a listen to peoples sound clips on this forum and find what you like.

Logged

Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
Pages: 1 2 [3] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.